|
Product Details:
|
| Steel Grade: | 420 | Thickness: | 5 Mm |
|---|---|---|---|
| Width: | 40 Mm | Length: | 4000 Mm |
| Surface Finish: | Ground And Polished | Standard: | ASTM A276 / DIN 1.4021 |
| Thickness Tolerance: | +/- 0.02 Mm | Edge Condition: | Ground Chamfer |
| Delivery Condition: | Annealed, Ground, Ready For Hardening | Processing Service: | Cutting, Bending, Drilling, Welding, Chamfering |
| Package: | Export Standard Bundle | ||
| Highlight: | Precision Ground 420 Bar,5mm Hardened Flat Bar,Martensitic 420 Flat Steel |
||
Precision Ground 420 stainless steel flat bar is supplied in a 5 mm x 40 mm rectangular section cut to 4000 mm, produced to ASTM A276 / DIN 1.4021 and finished with a Ground and Polished surface. Every bundle is rolled from certified heat numbers at our Shanxi mill, straightened, cut to length and inspected before it leaves the yard. Buyers who need a flat section that holds dimension through fabrication, welding and final installation use this bar as a direct replacement for hot rolled merchant bar where corrosion resistance and appearance both matter.
The bar is delivered in annealed, ground, ready for hardening condition with an edge prepared as ground chamfer. Thickness tolerance is held at +/- 0.02 mm, which keeps stacked assemblies square without extra machining. Because the section is uniform along its full length, fabricators can nest parts, run long weld seams and drill repetitive hole patterns without resetting fixtures for every piece.
Why This Section WorksGrinding removes decarburised skin so the customer heat treats a clean section, and hardness spread across a batch stays inside two points of Rockwell C. The bar also machines predictably: turning, milling, drilling and tapping all run at conventional stainless parameters, and the annealed structure limits work hardening during multi pass machining. Where a project needs a specific cut length, hole pattern or edge radius, our workshop can prepare the part before shipment so the material arrives ready to weld.
Key Features| Parameter | Specification |
|---|---|
| Steel Grade | 420 stainless steel |
| Standard | ASTM A276 / DIN 1.4021 |
| Thickness | 5 mm |
| Width | 40 mm |
| Length | 4000 mm, custom lengths available |
| Surface Finish | Ground and Polished |
| Edge Condition | Ground Chamfer |
| Thickness Tolerance | +/- 0.02 mm |
| Tensile Strength | 760 MPa min |
| Yield Strength | 420 MPa min |
| Elongation | 12% min |
| Hardness | HRC 50-55 after heat treatment |
| Delivery Condition | Annealed, Ground, Ready for Hardening |
| Processing Service | Cutting, bending, drilling, welding, chamfering |
This 5 mm x 40 mm flat bar is stocked for blade blanks, wear plates, food slicer components and mould wear inserts. Because the section is readily cut, drilled and welded on site, it suits maintenance teams that need a replacement strip the same week rather than a mill run. Common duties include reinforcement of thin sheet panels, frame gussets, wear strips, spacer bars and edge trim where a bright, corrosion resistant face is visible to the end user.
For outdoor installation in coastal or industrial atmospheres we recommend a periodic fresh water rinse, which removes chloride deposits before they can break down the passive layer. For welded assemblies, use a matched filler and clean the weld zone with a pickling paste or brush to restore full corrosion resistance along the seam.
Packing, Loading and Quality AssuranceBars are bundled with plastic strapping, interleaved with protective paper and wrapped in woven bag or wooden crate as required. Bundles are labelled with grade, heat number, size and quantity. Loading is planned for 20ft GP, 40ft GP and 40ft HG containers with the internal dimensions printed on the packing list, and every shipment is photographed before the doors close.
Quality control covers incoming coil and slab identification, in process thickness and width measurement, straightness sampling, surface inspection under daylight lamps and a final documentation check. Third party inspection by SGS, BV or Intertek can be arranged at cost, and pre shipment samples are available so the buyer can weld, machine and finish the material before committing to the full order.
Send us your drawing, cut list or application brief and our engineering team will confirm grade, section and finish, then return a quotation with lead time and freight options.
Contact Person: Johnny
Tel: 13395131255