|
Product Details:
|
| Steel Grade: | 316 | Thickness: | 12 Mm |
|---|---|---|---|
| Width: | 80 Mm | Length: | 6000 Mm |
| Surface Finish: | Hairline Brushed HL | Standard: | ASTM A479 / EN 1.4401 |
| Thickness Tolerance: | +/- 0.25 Mm | Edge Condition: | Round Edge |
| Delivery Condition: | Hot Rolled, Annealed, Hairline Brushed | Processing Service: | Cutting, Bending, Drilling, Welding, Chamfering |
| Package: | Export Standard Bundle | ||
| Highlight: | Brushed 316 Flat Bar,12mm Heavy Flat Bar,Hairline Finish 316 Steel |
||
Brushed 316 stainless steel flat bar is supplied in a 12 mm x 80 mm rectangular section cut to 6000 mm, produced to ASTM A479 / EN 1.4401 and finished with a Hairline Brushed HL surface. Every bundle is rolled from certified heat numbers at our Shanxi mill, straightened, cut to length and inspected before it leaves the yard. Buyers who need a flat section that holds dimension through fabrication, welding and final installation use this bar as a direct replacement for hot rolled merchant bar where corrosion resistance and appearance both matter.
The bar is delivered in hot rolled, annealed, hairline brushed condition with an edge prepared as round edge. Thickness tolerance is held at +/- 0.25 mm, which keeps stacked assemblies square without extra machining. Because the section is uniform along its full length, fabricators can nest parts, run long weld seams and drill repetitive hole patterns without resetting fixtures for every piece.
Why This Section WorksHairline brushing hides handling scuffs that would show on a mirror surface, so installed panels keep a consistent grain direction after site fabrication. The bar also machines predictably: turning, milling, drilling and tapping all run at conventional stainless parameters, and the annealed structure limits work hardening during multi pass machining. Where a project needs a specific cut length, hole pattern or edge radius, our workshop can prepare the part before shipment so the material arrives ready to weld.
Key Features| Parameter | Specification |
|---|---|
| Steel Grade | 316 stainless steel |
| Standard | ASTM A479 / EN 1.4401 |
| Thickness | 12 mm |
| Width | 80 mm |
| Length | 6000 mm, custom lengths available |
| Surface Finish | Hairline Brushed HL |
| Edge Condition | Round Edge |
| Thickness Tolerance | +/- 0.25 mm |
| Tensile Strength | 515 MPa min |
| Yield Strength | 205 MPa min |
| Elongation | 40% min |
| Hardness | HRB 95 max |
| Delivery Condition | Hot Rolled, Annealed, Hairline Brushed |
| Processing Service | Cutting, bending, drilling, welding, chamfering |
This 12 mm x 80 mm flat bar is stocked for marine outfitting, chemical plant walkways, pharmaceutical clean rooms and coastal balustrades. Because the section is readily cut, drilled and welded on site, it suits maintenance teams that need a replacement strip the same week rather than a mill run. Common duties include reinforcement of thin sheet panels, frame gussets, wear strips, spacer bars and edge trim where a bright, corrosion resistant face is visible to the end user.
For outdoor installation in coastal or industrial atmospheres we recommend a periodic fresh water rinse, which removes chloride deposits before they can break down the passive layer. For welded assemblies, use a matched filler and clean the weld zone with a pickling paste or brush to restore full corrosion resistance along the seam.
Packing, Loading and Quality AssuranceBars are bundled with plastic strapping, interleaved with protective paper and wrapped in woven bag or wooden crate as required. Bundles are labelled with grade, heat number, size and quantity. Loading is planned for 20ft GP, 40ft GP and 40ft HG containers with the internal dimensions printed on the packing list, and every shipment is photographed before the doors close.
Quality control covers incoming coil and slab identification, in process thickness and width measurement, straightness sampling, surface inspection under daylight lamps and a final documentation check. Third party inspection by SGS, BV or Intertek can be arranged at cost, and pre shipment samples are available so the buyer can weld, machine and finish the material before committing to the full order.
Send us your drawing, cut list or application brief and our engineering team will confirm grade, section and finish, then return a quotation with lead time and freight options.
Contact Person: Johnny
Tel: 13395131255