|
Product Details:
|
| Steel Grade: | 310S | UNS Number: | UNS S31008 |
|---|---|---|---|
| Diameter: | 32 Mm | Length: | 6000 Mm |
| Surface Finish: | Hot Rolled, Pickled And Turned | Standard: | ASTM A276 / EN 1.4845 |
| Diameter Tolerance: | +/- 0.12 Mm | Straightness: | 0.8 Mm Per Meter Max |
| Delivery Condition: | Solution Annealed At 1080 C, Pickled And Turned | Processing Service: | Cutting, Turning, Threading, Drilling, Chamfering |
| Package: | Export Standard Bundle | ||
| Highlight: | 310S Stainless Round Bar 32mm,High Temperature Round Bar,Furnace Grade 310S Bar |
||
310S stainless steel round bar at 32 mm diameter is produced to ASTM A276 / EN 1.4845 and supplied in 6000 mm cut lengths with a hot rolled, pickled and turned finish. Every bundle is rolled from a certified heat, then processed on peeling, straightening and grinding lines at our Shanxi works. The grade is 310S high chromium nickel austenitic stainless, chosen where the duty calls for a specific balance of corrosion resistance, strength and machinability rather than a general purpose alloy.
Diameter is held at +/- 0.12 mm with straightness at 0.8 mm per meter max, so the bar feeds into automatic lathes and machining centres without a straightening pass. Material arrives solution annealed at 1080 c, pickled and turned, meaning the structure is uniform from the skin to the core and the first cut removes metal rather than mill scale or decarburised layer.
Why Specify 310S25 percent chromium with 20 percent nickel lets 310S hold scale resistance through continuous service at 1150 C, which is beyond where 309 or 314 start to fail by oxidation. Machining follows conventional practice: carbide inserts at moderate surface speed, generous coolant and standard fixtures. Where the drawing calls for threads, keyways, flats or chamfers, our workshop prepares the part before shipment so the material lands ready to install instead of waiting in a machine queue.
Key Features| Parameter | Specification |
|---|---|
| Steel Grade | 310S stainless steel |
| UNS Number | UNS S31008 |
| Standard | ASTM A276 / EN 1.4845 |
| Diameter | 32 mm |
| Length | 6000 mm, custom lengths available |
| Surface Finish | Hot Rolled, Pickled and Turned |
| Diameter Tolerance | +/- 0.12 mm |
| Straightness | 0.8 mm per meter max |
| Tensile Strength | 515 MPa min |
| Yield Strength | 205 MPa min |
| Elongation | 40% min |
| Hardness | HRB 95 max |
| Delivery Condition | Solution Annealed at 1080 C, Pickled and Turned |
| Processing Service | Cutting, turning, threading, drilling, chamfering |
The 32 mm section is stocked for furnace hearth rolls, kiln support shafts, incinerator grates and pyrometer protection tubes. Because the bar machines and welds with standard shop equipment, it suits maintenance teams that need a replacement part inside the same week rather than a fresh mill run. Typical duties include drive shafts, pivot pins, tie rods, spacer sleeves and instrument bodies exposed to the process fluid.
For outdoor or washed down service we recommend a fresh water rinse at planned maintenance intervals to clear chloride deposits before they break down the passive layer. Welded or heavily turned assemblies should be cleaned with pickling paste locally so full corrosion resistance returns at the worked zone.
Packing, Loading and Quality AssuranceBars are bundled with plastic strapping, interleaved with protective paper, then wrapped in woven bag or packed in wooden crates to suit the destination. Each bundle is labelled with grade, heat number, diameter and quantity. Loading is planned for 20ft GP, 40ft GP and 40ft HG containers, and every shipment is photographed before the doors close.
Quality control covers billet identification on arrival, in process diameter and ovality measurement, straightness sampling, surface inspection under daylight lamps and a final documentation check before release. Third party inspection by SGS, BV or Intertek can be arranged, and pre shipment samples let the buyer turn, thread and finish the material before committing to the full order.
Send your drawing, cut list or application brief and our engineering team will confirm grade, diameter and finish, then return a quotation with lead time and freight options.
Contact Person: Johnny
Tel: 13395131255