|
Product Details:
|
| Steel Grade: | 17-4PH | UNS Number: | UNS S17400 |
|---|---|---|---|
| Diameter: | 45 Mm | Length: | 4000 Mm |
| Surface Finish: | Peeled, Ground, H1150 Condition | Standard: | ASTM A564 / UNS S17400 |
| Diameter Tolerance: | +/- 0.05 Mm | Straightness: | 0.4 Mm Per Meter Max |
| Delivery Condition: | Solution Treated Plus H1150 Age Hardening | Processing Service: | Cutting, Turning, Threading, Drilling, Chamfering |
| Package: | Export Standard Bundle | ||
| Highlight: | 17-4PH Round Bar 45mm,Precipitation Hardened Stainless Bar,H1150 Condition Round Bar |
||
17-4PH stainless steel round bar at 45 mm diameter is produced to ASTM A564 / UNS S17400 and supplied in 4000 mm cut lengths with a peeled, ground, h1150 condition finish. Every bundle is rolled from a certified heat, then processed on peeling, straightening and grinding lines at our Shanxi works. The grade is 17-4PH precipitation hardening martensitic stainless, chosen where the duty calls for a specific balance of corrosion resistance, strength and machinability rather than a general purpose alloy.
Diameter is held at +/- 0.05 mm with straightness at 0.4 mm per meter max, so the bar feeds into automatic lathes and machining centres without a straightening pass. Material arrives solution treated plus h1150 age hardening, meaning the structure is uniform from the skin to the core and the first cut removes metal rather than mill scale or decarburised layer.
Why Specify 17-4PHCopper and niobium allow 17-4PH to be machined in the soft annealed state and then aged to roughly 1000 MPa tensile, which gives shaft strength close to a low alloy steel with stainless corrosion behaviour. Machining follows conventional practice: carbide inserts at moderate surface speed, generous coolant and standard fixtures. Where the drawing calls for threads, keyways, flats or chamfers, our workshop prepares the part before shipment so the material lands ready to install instead of waiting in a machine queue.
Key Features| Parameter | Specification |
|---|---|
| Steel Grade | 17-4PH stainless steel |
| UNS Number | UNS S17400 |
| Standard | ASTM A564 / UNS S17400 |
| Diameter | 45 mm |
| Length | 4000 mm, custom lengths available |
| Surface Finish | Peeled, Ground, H1150 Condition |
| Diameter Tolerance | +/- 0.05 mm |
| Straightness | 0.4 mm per meter max |
| Tensile Strength | 1000 MPa min |
| Yield Strength | 860 MPa min |
| Elongation | 16% min |
| Hardness | HRC 33 to 38 |
| Delivery Condition | Solution Treated plus H1150 Age Hardening |
| Processing Service | Cutting, turning, threading, drilling, chamfering |
The 45 mm section is stocked for aerospace actuator rods, high pressure pump shafts, valve stems and mould guide pins. Because the bar machines and welds with standard shop equipment, it suits maintenance teams that need a replacement part inside the same week rather than a fresh mill run. Typical duties include drive shafts, pivot pins, tie rods, spacer sleeves and instrument bodies exposed to the process fluid.
For outdoor or washed down service we recommend a fresh water rinse at planned maintenance intervals to clear chloride deposits before they break down the passive layer. Welded or heavily turned assemblies should be cleaned with pickling paste locally so full corrosion resistance returns at the worked zone.
Packing, Loading and Quality AssuranceBars are bundled with plastic strapping, interleaved with protective paper, then wrapped in woven bag or packed in wooden crates to suit the destination. Each bundle is labelled with grade, heat number, diameter and quantity. Loading is planned for 20ft GP, 40ft GP and 40ft HG containers, and every shipment is photographed before the doors close.
Quality control covers billet identification on arrival, in process diameter and ovality measurement, straightness sampling, surface inspection under daylight lamps and a final documentation check before release. Third party inspection by SGS, BV or Intertek can be arranged, and pre shipment samples let the buyer turn, thread and finish the material before committing to the full order.
Send your drawing, cut list or application brief and our engineering team will confirm grade, diameter and finish, then return a quotation with lead time and freight options.
Contact Person: Johnny
Tel: 13395131255