|
Product Details:
|
| Steel Grade: | 304 | UNS Number: | UNS S30400 |
|---|---|---|---|
| Diameter: | 8 Mm | Length: | 3000 Mm |
| Surface Finish: | Annealed, Bright, Coil Feed Quality | Standard: | ASTM A276 / EN 1.4301 |
| Diameter Tolerance: | H9, +/- 0.03 Mm | Straightness: | 0.3 Mm Per Meter Max |
| Delivery Condition: | Annealed And Bright, Coil Feed Straightened | Processing Service: | Cutting, Turning, Threading, Drilling, Chamfering |
| Package: | Export Standard Bundle | ||
| Highlight: | 8mm Stainless Round Bar 304,Coil Feed Quality Round Bar,Small Diameter SS Round Bar |
||
304 stainless steel round bar at 8 mm diameter is produced to ASTM A276 / EN 1.4301 and supplied in 3000 mm cut lengths with a annealed, bright, coil feed quality finish. Every bundle is rolled from a certified heat, then processed on peeling, straightening and grinding lines at our Shanxi works. The grade is 304 austenitic stainless in small bar diameter, chosen where the duty calls for a specific balance of corrosion resistance, strength and machinability rather than a general purpose alloy.
Diameter is held at h9, +/- 0.03 mm with straightness at 0.3 mm per meter max, so the bar feeds into automatic lathes and machining centres without a straightening pass. Material arrives annealed and bright, coil feed straightened, meaning the structure is uniform from the skin to the core and the first cut removes metal rather than mill scale or decarburised layer.
Why Specify 304Small diameters punish any variation in straightness and ovality, so this 8 mm stock is straightened to 0.3 mm per metre and cut from coil feed quality bar that runs through sliding head lathes without a guide bush adjustment. Machining follows conventional practice: carbide inserts at moderate surface speed, generous coolant and standard fixtures. Where the drawing calls for threads, keyways, flats or chamfers, our workshop prepares the part before shipment so the material lands ready to install instead of waiting in a machine queue.
Key Features| Parameter | Specification |
|---|---|
| Steel Grade | 304 stainless steel |
| UNS Number | UNS S30400 |
| Standard | ASTM A276 / EN 1.4301 |
| Diameter | 8 mm |
| Length | 3000 mm, custom lengths available |
| Surface Finish | Annealed, Bright, Coil Feed Quality |
| Diameter Tolerance | h9, +/- 0.03 mm |
| Straightness | 0.3 mm per meter max |
| Tensile Strength | 515 MPa min |
| Yield Strength | 205 MPa min |
| Elongation | 40% min |
| Hardness | HRB 88 max |
| Delivery Condition | Annealed and Bright, Coil Feed Straightened |
| Processing Service | Cutting, turning, threading, drilling, chamfering |
The 8 mm section is stocked for Swiss type lathe parts, connector pins, electronic hardware and small fastener blanks. Because the bar machines and welds with standard shop equipment, it suits maintenance teams that need a replacement part inside the same week rather than a fresh mill run. Typical duties include drive shafts, pivot pins, tie rods, spacer sleeves and instrument bodies exposed to the process fluid.
For outdoor or washed down service we recommend a fresh water rinse at planned maintenance intervals to clear chloride deposits before they break down the passive layer. Welded or heavily turned assemblies should be cleaned with pickling paste locally so full corrosion resistance returns at the worked zone.
Packing, Loading and Quality AssuranceBars are bundled with plastic strapping, interleaved with protective paper, then wrapped in woven bag or packed in wooden crates to suit the destination. Each bundle is labelled with grade, heat number, diameter and quantity. Loading is planned for 20ft GP, 40ft GP and 40ft HG containers, and every shipment is photographed before the doors close.
Quality control covers billet identification on arrival, in process diameter and ovality measurement, straightness sampling, surface inspection under daylight lamps and a final documentation check before release. Third party inspection by SGS, BV or Intertek can be arranged, and pre shipment samples let the buyer turn, thread and finish the material before committing to the full order.
Send your drawing, cut list or application brief and our engineering team will confirm grade, diameter and finish, then return a quotation with lead time and freight options.
Contact Person: Johnny
Tel: 13395131255