|
Product Details:
|
| Steel Grade: | 316L | UNS Number: | UNS S31603 |
|---|---|---|---|
| Diameter: | 60 Mm | Length: | 6000 Mm |
| Surface Finish: | Peeled, Rough Turned And Polished | Standard: | ASTM A479 / EN 1.4404 |
| Diameter Tolerance: | +/- 0.15 Mm | Straightness: | 1.0 Mm Per Meter Max |
| Delivery Condition: | Solution Annealed, Peeled And Rough Turned | Processing Service: | Cutting, Turning, Threading, Drilling, Chamfering |
| Package: | Export Standard Bundle | ||
| Highlight: | 60mm Stainless Round Bar 316L,Large Diameter Round Bar,Peeled Heavy Section Bar |
||
316L stainless steel round bar at 60 mm diameter is produced to ASTM A479 / EN 1.4404 and supplied in 6000 mm cut lengths with a peeled, rough turned and polished finish. Every bundle is rolled from a certified heat, then processed on peeling, straightening and grinding lines at our Shanxi works. The grade is 316L austenitic stainless in heavy section diameter, chosen where the duty calls for a specific balance of corrosion resistance, strength and machinability rather than a general purpose alloy.
Diameter is held at +/- 0.15 mm with straightness at 1.0 mm per meter max, so the bar feeds into automatic lathes and machining centres without a straightening pass. Material arrives solution annealed, peeled and rough turned, meaning the structure is uniform from the skin to the core and the first cut removes metal rather than mill scale or decarburised layer.
Why Specify 316LHeavy sections are where centre segregation shows up, so 60 mm bar is peeled deep enough to remove the as cast skin and then ultrasonically checked before turning, which keeps the core sound for large shaft work. Machining follows conventional practice: carbide inserts at moderate surface speed, generous coolant and standard fixtures. Where the drawing calls for threads, keyways, flats or chamfers, our workshop prepares the part before shipment so the material lands ready to install instead of waiting in a machine queue.
Key Features| Parameter | Specification |
|---|---|
| Steel Grade | 316L stainless steel |
| UNS Number | UNS S31603 |
| Standard | ASTM A479 / EN 1.4404 |
| Diameter | 60 mm |
| Length | 6000 mm, custom lengths available |
| Surface Finish | Peeled, Rough Turned and Polished |
| Diameter Tolerance | +/- 0.15 mm |
| Straightness | 1.0 mm per meter max |
| Tensile Strength | 485 MPa min |
| Yield Strength | 170 MPa min |
| Elongation | 40% min |
| Hardness | HRB 90 max |
| Delivery Condition | Solution Annealed, Peeled and Rough Turned |
| Processing Service | Cutting, turning, threading, drilling, chamfering |
The 60 mm section is stocked for large pump shafts, marine stem shafts, valve bodies and heavy machined bushes. Because the bar machines and welds with standard shop equipment, it suits maintenance teams that need a replacement part inside the same week rather than a fresh mill run. Typical duties include drive shafts, pivot pins, tie rods, spacer sleeves and instrument bodies exposed to the process fluid.
For outdoor or washed down service we recommend a fresh water rinse at planned maintenance intervals to clear chloride deposits before they break down the passive layer. Welded or heavily turned assemblies should be cleaned with pickling paste locally so full corrosion resistance returns at the worked zone.
Packing, Loading and Quality AssuranceBars are bundled with plastic strapping, interleaved with protective paper, then wrapped in woven bag or packed in wooden crates to suit the destination. Each bundle is labelled with grade, heat number, diameter and quantity. Loading is planned for 20ft GP, 40ft GP and 40ft HG containers, and every shipment is photographed before the doors close.
Quality control covers billet identification on arrival, in process diameter and ovality measurement, straightness sampling, surface inspection under daylight lamps and a final documentation check before release. Third party inspection by SGS, BV or Intertek can be arranged, and pre shipment samples let the buyer turn, thread and finish the material before committing to the full order.
Send your drawing, cut list or application brief and our engineering team will confirm grade, diameter and finish, then return a quotation with lead time and freight options.
Contact Person: Johnny
Tel: 13395131255